Hard Water Comparison Information

Test                            Guideline Values               Comments

pH                                          < 6.5                                May be corrosive.
                                                < 8.4                                Progressively decreases efficiency of chlorination.
                                                > 8.5                                May cause scale and taste problems.

TDS                                       < 500mg/l                     Regarded as good quality drinking water based on taste.
                                                500 – 1000mg/l           Is acceptable based on taste.
                                                > 1000mg/l                   May be associated with excessive scaling and corrosion.

Hardness                              0 – 20mg/l                  Soft – Possibly corrosive.
As Calcium                          21 – 40mg/l                 Moderately soft – Good.
(Ca)                                         41 – 60mg/l                 Slightly hard – Possible scaling problems
                                                  61 – 80mg/l                 Moderately hard – Scaling problems.                                                                                      81 – 120mg/l               Hard – Increased scaling problems.
                                                   > 121mg/l                    Very Hard – excessive scaling problems.

Hardness                              0 – 50mg/l                   Soft – Possibly corrosive.
As Calcium Carbonate    51 – 100mg/l               Moderately soft – Good.
(CaCO3)                                 101 – 150mg/l             Slightly hard – Possible scaling problems.
                                                  151 – 200mg/l              Moderately hard – Scaling problems.
                                                  201 – 300mg/l             Hard – Increased scaling problems.
                                                   > 300mg/l                    Very Hard – excessive scaling problems.

Salinity                                 > 15us/cm                       Pure rain water.
                                                  200 – 800us/cm           Town water.
                                                  < 800us/cm                   Freshwater rivers.
                                                  800 – 1600us.cm          Marginal river water.
                                                  1600 – 4800us/cm       Brackish water
                                                > 4800us/cm                   Saline water

Saturation Index             -5                                      Extreme corrosion.
(SI)                                         -4                                       Severe corrosion.
                                                  -3                                      High corrosion.
                                                  -2                                      Moderate corrosion.
                                                  -1                                      Mild corrosion.
                                                  0                                       Balanced.
                                                   1                                       Mild scale coating.
                                                  2                                       Moderate scale coating.
                                                  3                                       High scale coating.
                                                  4                                       Severe scale forming.

Soluble ions found in water are:

Cations                                                                      Anions

Calcium (Ca2+)                                  Carbonates (CO32-)              Nitrate (NO31-)

Magnesium (Mg2+)                           Bicarbonates (HCO31-)        Boron (B3+)

Sodium (Na)                                      Chloride (Cl1-)                       Phosphate (P043-)
Potassium (K)                                    Sulfate (S042-)

Canions – Is an ion with fewer electrons than protons, giving it a positive charge.
Anions – In an ion with more electrons than protons , giving it a negative charge.

Electrical Conductivity
Is an assessment of waters salinity or of all total dissolved salts (ions) but will reliably indicate the degree with which a salinity problem is likely to occur.

Totally Dissolved Solids (TDS)
Total Dissolved Salts is the sum of all the ions present in a sample of water and represents the total salt

Content of the water (1mg/l = 1ppm).

Saturation Index
This gives the relationship between pH, salinity, alkalinity and hardness.  It is used to assess the scaling (encrustation) or the corrosive potential of the water. If the index is between –0.5 and +0.5, there is little likelihood of either scaling or corrosion of pipes and fittings. 

Total Alkalinity (CaCo3)
If the Total Alkalinity is low the water may be aggressive and cause corrosion to pipe work and structures.

If the Total Alkalinity is high the water may more readily promote scale formation.

pH

Measures the acidity or alkalinity of a water sample. This measures if water is acidic (<7, neutral (7) or alkaline (>7).

 

This entry was posted in General. Bookmark the permalink.